ေလးကိုတင္ေပးလိုက္ပါတယ္။ဘယ္လို
I8200XXUANC1 Android 4.2.2 Firmware Details:
Device: Samsung Galaxy S3 Mini (Value Edition)Model: GT-I8200
Version: Android 4.2.2
PDA: I8200XXUANC1 Date : 03.3.2014
Warning!
The firmware is released only for the Samsung Galaxy S3 Mini GT-I8200. So, don’t try this tutorial on any other Android device and also the tutorial is based on Windows PC. AndroidOfficer is not responsible If anything wrong happens to your device after following this guide, try this at your own risk. However, we believe that if you follow the instructions carefully that mentioned in this guide, your device shouldn’t face any issue.
Pre Requisites:
Before proceeding to update guide, AndroidOfficer recommend to backup all your device data and settings to restore later when you need that. However, official firmware restore all previous data but if your device get stuck at bootloop issue or fall into any error, the backup file will help you to restore all your data.- Check your device battery percentage, make sure that your device have at least 60% battery power .
- Backup all your device data and settings to external storage.
- Check that USB Debugging is Enabled on your device, otherwise it is not possible to connect and transfer files between PC and Galaxy S3 Mini GT-I8200 via USB.
- Install USB Driver for Galaxy S3 Mini GT-I8200 on your PC.
How to Install/Update Official Firmware on Galaxy S3 Mini GT-I8200 Manually through Odin:
- Download firmware from the above list and extract the zip file, you should get .tar.md5 file along with few other files.
- Download Odin v3.09 and extract the zip file, you should get Odin v3.09.exe file along with other files.
- Now Open/Run Odin v3.09.exe file as an administrator (to open program with admin privilege, right click on the Odin v3.09.exe file and click on the “Run as administrator” from the context menu, this is applicable only on Windows Vista, Windows 7 or higher PC)
- Switch off and boot Galaxy S3 Mini I8200 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode.
- Now connect your Galaxy S3 Mini I8200 to your PC via USB cable
- In Odin screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been successfully detected by Odin. (If not, then try connecting through another USB port. If you are using desktop PC, use USB port located at the back of the CPU. If still don’t work, then you should reinstall the USB driver and try again)
- Make sure that, only the “Auto Reboot” and “F. Reset Time”options are checked in Odin screen.
- Now, click on the AP button and select the .tar.md5 file that you get by extracting the firmware zip file in step 1.
- Now, click on the Start button to begin the installation process, and wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect/unplug your phone from computer
က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္ ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္
Thank You For Downloading And Dont Forget to Clicking Once on a Ad Banner.
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာ
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာ
★★နည္းပညာၿမိဳ႕ေတာ္★★
