★★L520VPUAMK2 Android 4.2.2 Jelly Bean Firmware for Sprint Galaxy S4 Mini SPH-L520 ★★




Galaxy S4 Mini SPH-L520 ကိုအသံုးျပဳသူေတြအတြက္ L520VPUAMK2 Android 4.2.2 Jelly Bean Firmware ကိုတင္ေပးလိုက္ပါျပီ။ဘယ္လိုျပဳလုပ္ရမယ္ဆိုတာကိုေတာ့ေအာက္မွာအဆင့္ဆင့္ရွင္းျပထား
တာကိုဖတ္သြားလိုက္ပါ။Owners of Sprint Samsung Galaxy S4 Mini SPH-L520 can now update their device to the VPUAMK2 Android 4.2.2 Jelly Bean official firmware.Samsung recently
started rolling out an OTA update about the firmware. The latest firmware build version is L520VPUAMK2.

1-Check battery percentage, your device should have at least battery power
2-Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
3-Backup important data and settings to external storage.
4-Install USB driver for your device on your computer.

1-If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it replaced by this official Stock ROM

2-Custom Recovery CWM or TWRP Recovery will be replaced by Stock Recovery

3-After flashing official firmware, your device will no longer belongs to rooted device.
However you can root your device any time after flashing the firmware.


How to Install

1- Download Android 4.2.2 VPUAMK2 Firmware for Galaxy S4 Mini L520 from the above list

2- Download Odin 3.07

3- Switch off your phone and boot Galaxy S4 Mini L520 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

4- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5- Now connect your Galaxy S4 Mini L520 to your computer via USB cable

6- In Odin3 screen, you should see a COM Port number like [COM7] at ID:COM section and Added! text at the message box. This means your device has been detected by Odin3.

7- Make sure that, only the Auto Reboot and Reset Time options are checked.

8- Now, extract the downloaded firmware zip file, you find a firmware file with extension .tar.md5

9- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension
 (The firmware file look something like: L520XXDLJ5_L520ODDDLI7_INU.tar.md5)

10- Now, click on the Start button to begin the installation process, wait few moments.

11- Once completed, you would see PASS  message in ID:COM port having green background

12- Your phone should automatically reboot after completion

13- You can now disconnect your phone from computer

14- Finish.


က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္  ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။

 
Thank You For Downloading And Dont Forget to Clicking Once on a Ad Banner.
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာမ်ားကို  ကလစ္ခဲ့ပါခင္ဗ်ာ။




http://mm-knowledgeinfo.blogspot.com/2014/02/inpixio-photo-filters-and-effects.html 




★★နည္းပညာၿမိဳ႕ေတာ္★★










ေဒါင္းနည္းမ်ားမသိပါက ဒီမွာ သြားၾကည့္ေပးပါခင္ဗ်ာ
Related Posts Plugin for WordPress, Blogger...